Xtramus NuApps-2544-RM V1.3 - Manual (Page 5)

5
1. NuApps-2544-RM Overview
NuApps-2544-RM is an application that’s designed base on RFC-2544 for analyzing Ethernet
switches, bridges, and routers. NuApps-2544-RM’s multiple topologies and the
load-generating capabilities provide an effective way to evaluate DUT Throughput, Latency,
Packet Loss, and Back to Back under different modes such as One-to-One, One-to-Many, and
Many-to-One. NuApps-2544-RM’s real-time display of test results and various customizable report formats
make it easy to view the test data and organize them into an appropriate form for debug, report, and
record.
NuApps-2544-RM is designed for Xtramus Technologies XM-RM series module cards listed in the table
down below:
Module Cards Support NuApps-2544-RM
XM-RM661 XM-RM671 XM-RM681 XM-RM731
XM-RM751 XM-RM761 XM-RM781 XM-RM891
＊Note: NuStreams-2000i and NuStreams-600i are required as well.
Also, the firmware/FPGA/PROM version of your XM-RM module cards shall meet the requirements listed
down below:
Module Cards Requirements for NuApps-2544-RM
Module Firmware FPGA PROM
XM-RM661 v1.1b004 v1.2b009 v1.5b044
XM-RM671 v1.1b004 v1.2b009 v1.5b044
XM-RM681 v1.1b004 v1.2b009 v1.5b044
XM-RM731 v1.4b022 v1.2b079 v1.5b044
XM-RM751 v1.1b004 v1.2b009 v1.5b044
XM-RM761 v1.1b004 v1.2b009 v1.5b044
XM-RM781 v1.1b004 v1.2b009 v1.5b044
XM-RM891 v1.1b014 v1.2b005 v1.5b044
Please make sure that your PC meets the requirements listed in the table down below before installing
NuApps-2544-RM.
OS Windows 2000/Windows XP Windows Vista/Windows 7
CPU Pentium 1.3GHz or Higher
RAM 512MB RAM 1GB RAM
HDD 10 GB Available Space
*Note: Large amount of data will be generated while running NuApps-2544-RM. It is recommended to
preserve enough available Hard-Disk space to store these data.
E-mail: [email protected]
Website: www.Xtramus.com
XTRAMUS TECHNOLOGIES ®