Xtramus NuApps-2544-RM V1.3 - Manual (Page 17)

17
Port Reserving
If you would like to make a new configuration,
please choose “Create a New Configuration”
from the Select Config pop-up window. A
Reserved Page window will pop up when you
choose to create a new configuration.
The Reserved Page pop-up window can be
divided as:
¾ A. Tree Style Tab Buttons
¾ B. Active Port Tree Style Tab
¾ C. Tester Information
¾ D. Group Selection
¾ E. OK/Cancel Buttons
After selecting the port for test performing, please
click OK button to continue.
A. Tree Style Tab Buttons
These two buttons allow you to unfold/fold all the Active Port tree style tab displayed in B.
These two buttons allow you to check/uncheck all the Active Port displayed in B.
B. Active Port Tree Style Tab
All the module cards, along with their Active Ports are listed
here in this field. You can fold/unfold the tree style tab by
clicking / icons. Also, you can check/uncheck the port by
clicking
icon.
C. Tester Information
You can set the Tester Name and DUT Name here in the
Tester Information field. The Tester Name and DUT Name
you’ve set here will be applied when naming the configuration
files.
Also, the number of ports you’ve selected will be displayed in
Number of Selected Port(s) field.
D. Group Selection
Clicking the check box in front of each module card allows you
to active all the ports of the module cards.
E-mail: [email protected]
Website: www.Xtramus.com
XTRAMUS TECHNOLOGIES ®