Xtramus MCM-W V1.3 - Manual (Page 9)

1.3.2. MCM-W Front Panel
As mentioned in “1.3.1. MCM-W Outer Case”, MCM-W comes with various different types of ports,
providing media converting platforms for different types of media. Please see the sections down below
for more detailed information/specification for MCM-W.
A. Front Panel of MCM-7S81-W
MCM-7S81-W Front Panel Specification
Port A RJ45
Interface
Port B SFP
Data Transfer Rate 1000 Mbps
Ethernet Mode
1000Base-T
1000Base-X
LED Status
Green ON MCM-7S81-W is power on.
Power
Green OFF MCM-7S81-W is power off.
Green ON
MCM-7S81-W is booting properly and is
ready for tests.
SYS
Yellow ON Error occurred when booting MCM-7S81-W.
Green ON Port A/B is connected.
A/B
Green Blinking Port A/B is transmitting/receiving data.
▇ User-defined LED
▲ User-defined LED
Note: All LEDS will be off when upgrading FPGA/Firmware
9
E-mail: [email protected]
Website: www.Xtramus.com
XTRAMUS TECHNOLOGIES ®