Xtramus MCM-W V1.3 - Manual (Page 35)

3.1.8. MCM-W Management Webpage – Maintenance
7 options are available in the Maintenance configuration webpage: Save Changes, Update Firmware,
Update FPGA, System Reboot, System Config, Config Upload, Factory Defaults.
A. Save Changes
Save Changes
Save
If you don’t save the setting you’ve made via MCM-W’s configuration webpage,
all settings will be erased after rebooting MCM-W. Please click the “Save”
button to save the settings to MCM-W’s NV-RAM.
B. Update F/W (Firmware)
Update F/W (Firmware)
Browse…
Click the Browse… button to choose the firmware file you would like to
upgrade. MCM-W’s firmware files are in the format of “*.bin”.
Send Click this button to start upgrading MCM-W’s firmware.
Note: All LEDS will be off when upgrading FPGA/Firmware. Please DO NOT power off your MCM-W.
C Update FPGA
Update FPGA
Browse…
Click the Browse… button to choose the FPGA file you would like to upgrade.
MCM-W’s FPGA files are in the format of “*.bin”.
Send Click this button to start upgrading MCM-W’s FPGA.
Note: All LEDS will be off when upgrading FPGA/Firmware. Please DO NOT power off your MCM-W.
35
E-mail: [email protected]
Website: www.Xtramus.com
XTRAMUS TECHNOLOGIES ®