Xtramus MCM-W V1.3 - Manual (Page 24)

3. MCM-W Management
You can configure MCM-W’s settings and view statistics generated while performing media converting with
MCM-W by:
¾ Connecting MCM-W and PC to the same network via an RJ45 cable, and accessing MCM-W’s
settings/statistics with PC’s web browser.
¾ Connecting MCM-W and PC via a 2.5mm Phone Jack to RS232 cable, and accessing MCM-W’s
settings/statistics with HyperTerminal Softwares.
Please see the sections down below for more information regarding to MCM-W management.
3.1. Managing MCM-W with Management Webpage
MCM-W Series is embedded with a management webpage, and can be accessed by connecting MCM-W
Series’ Management Port to the network which your PC is connected to via an RJ45 cable.
Before accessing to MCM-W Series’ configuration webpage with your PC’s web browser, please set the
network according MCM-W Series’ default IP Address (192.168.1.8). The figure down below is an
example of network/PC settings for accessing MCM-W Series management webpage.
Note: Please note that if you leave the Phone Jack to RS232 Cable plugged in MCM-W, you won’t
be able to login to MCM-W’s management webpage.
24
E-mail: [email protected]
Website: www.Xtramus.com
XTRAMUS TECHNOLOGIES ®