Vectronics VEC-121K - Manual (Page 9)

VEC-121K Owner's Manual Crystal Radio Set Kit
7
PARTS LIST
You are just about ready to begin your kit building adventure! But first, let’s
take a few minutes to make sure everything needed is present and accounted for.
If any parts are missing or damaged, you’ll need to refer to the directions given
in the Vectronics kit warranty section of the manual.
"
Qty Part Description
!
8 Phillips head screws
! 1 5 inch length of white 2-1/2” diameter PVC plastic pipe
! 1 100 foot spool of 18 AWG enamel coated wire.
! 6 Fahnstock clips.
!
1 Tuning capacitor shaft extension
! 1 Tuning capacitor
! 1 Tuning knob
! 1 Double-sided foam tape
! 1 Earphone
!
1 Pine board , 3/4” high by 5-1/4” deep by 6” wide
! 1 Insulated stranded wire, 7 feet long
! 1 27K resistor (red-violet-orange-gold)
! 1 1N34A germanium diode
Fahnstock clips
Tuning capacitor.