TVLogic LVM-091W-M - Manual (Page 30)

Other Functions
VECTOR_Y CB CR : Displays Vector scope and Y/Cb/Cr waveform simultaneously.
- This item selects the output line of WAVEFORM/VECTOR.
- This item activates when LINE WAVEFORM feature is selected.
- Activate Waveform by pressing [W-FORM/VECTOR] button, then use [UP]/[DOWN] button to
select a desired vertical line.
- Available values are as follows (SDI signal standards):
* PAL : MIN 17, MAX 522
* NTSC : MIN 23, MAX 623
* 720p : MIN 26, MAX 750
* 1080i : MIN 21, MAX 1123
* 1080p : MIN 42, MAX 1121
[7] LINE SELECT FUNCTIONS(WAVEFORM/VECTOR) (This function is only available with SDI Input.)
POSITION CHANGES IF THE VALUE CHANGES IN LINE SELECT OPTION.
M
ult
i F
orm
at
L
CD M
oni
to
r
30