TVLogic LVM-091W-M - Manual (Page 14)

Mu
lti F
orma
t L
CD Monit
or
14
Menu Contents
[1] PICTURE
Below are descriptions for each function of the menu.
BRIGHTNESS
- This item indicates brightness value between -128 ~ 127.
# Brightness can be adjusted by using the [BRIGHT] control knob on the front of the monitor.
CONTRAST
- This item indicates contrast ratio value between -128 ~ 127.
#Contrast can be adjusted by using the [CONTRAST] control knob on the front of the monitor.
CHROMA
- This item indicates saturation value between -128 ~ 127.
# Chroma can be adjusted by using the [CHROMA] control knob on the front of the monitor.
PHASE
- This item indicates phase value between -128 ~ 127.
#Phase can be adjusted by using the [PHASE] and [UP]/[DOWN] button.
APERTURE
- This item indicates sharpness value between -12 ~ 12.
#Aperture can be adjusted by using the [APERTURE] control knob on the front of the monitor.
NTSC Setup
- This item sets the IRE value under NTSC mode between 0 IRE and 7.5 IRE.
- Only available in COMPOSITE 1/2/3 and S-VIDEO modes containing a NTSC signal.
KNOB Lock
- This item locks the control knobs(APERTURE, BRIGHT, CHROMA, CONTRAST, VOLUME) on the front
of the monitor.