beautypg.com

Controls & functions, Front – TVLogic LVM-074W User Manual

Page 9

background image

Multi Format LCD Monitor 9

3. Controls & Functions

FRONT

• [OPERATE] Lamp

- Indicates condition and power status of unit.

- Light turns off when the power is disconnected.

- Standby mode is indicated by a red LED light.

- Normal (active) mode is indicated by a Green

LED light.

- Restores to previous state when monitor

power turns off and comes back on.

• [POWER] Button

- Used to turn power on and off.

• AUDIO OUT (Phone Jack)

- Used for Stereo Audio Output through Phone

Jack. (video signals with embedded audio only)

• PGM (Mini USB)

- This terminal is used to upgrade the firmware

or color calibration made by TVLogic.

• [TALLY] Lamp

- Tally lamp that can be toggled in green or red

using the REMOTE(RJ-45) port.

• [BRIGHT] Knob

- Used to adjust the degree of brightness.

- The value is selectable between -100 ~ 100.

• [CONTRAST] Knob

- Used to adjust the contrast.

- The value is selectable between -100 ~ 100.

• [F5/VOLUME] Knob

- Used to adjust the volume for internal speaker

and external output.

- The value is selectable between 0 ~ 30.

- [F5] : Press F5 Knob for 2 second to set the

function. Available functions are [VOLUME]-

[CHROMA]-[APERTURE]-[PHASE]-[FOCUS

LEVEL].

• [UP/DOWN/ENTER] Knob

- Used to move within the menu when OSD

menu is activated, and is also used to

decrease or increase the value of the selected

feature.

- Press the knob to select the main menu and

sub menus.

• [BRIGHT] Knob

- Used to adjust the degree of brightness.

- The value is selectable between -100 ~ 100.

• [CONTRAST] Knob

- Used to adjust the contrast.

- The value is selectable between -100 ~ 100.

• [F5/VOLUME] Knob

- Used to adjust the volume for internal speaker

and external output.

- The value is selectable between 0 ~ 30.

- [F5] : Press F5 Knob for 2 second to set the

function. Available functions are [VOLUME]-

[CHROMA]-[APERTURE]-[PHASE]-[FOCUS

LEVEL].

• [UP/DOWN/ENTER] Knob

- Used to move within the menu when OSD

menu is activated, and is also used to

decrease or increase the value of the selected

feature.

- Press the knob to select the main menu and

sub menus.

This manual is related to the following products: