Button functions, 4] function key set button [5] scan button – TVLogic LVM-074W User Manual
Page 22

22 Multi Format LCD Monitor
6. Button Functions
2. Move to desired function and press [ENTER]
button to select.
3. Once the function is set, press the
Function button(F1~F4) to activate
the function.
• Used to make a quick setting of the
Function Key.
1. Press the function button(F1~F4) on the front
of the monitor for more than 2 seconds and
activate the OSD menu as follows.
[4] Function Key Set Button
[5] SCAN Button
• This product supports various scan modes.
• Press [SCAN] button on the front of the
monitor to activate different scan modes.
1. [Press [SCAN] button continuously to
activate various scan modes:
ZERO SCAN -> OVER SCAN -> Pixel To Pixel
-> USER.
2. The following represents the different types
of scan mode. When a scan mode is selected,
display skips the next mode if its required
condition is not met.
- OVER SCAN : Zooms in/out of the image to
96% of its original size without changing the
aspect ratio of.
- ZERO SCAN : Zooms in/out of the image
without changing the aspect ratio.
- Pixel To Pixel SCAN : 1:1 pixel mapping
of original image. This feature is available
only when the size of the original image is
bigger than the screen size. Press [ENTER]
button to rotate the position.
MID LEFT -> TOP LEFT -> TOP MID -> TOP
RIGHT -> MID RIGHT -> BOT RIGHT -> BOT
MID -> BOT LEFT