Controls & functions, Rear – TVLogic LVM-074W User Manual
Page 10

10 Multi Format LCD Monitor
3. Controls & Functions
REAR
• LAN
- Used for easy firmware updates.
• [RS422 IN/OUT] (RJ-45)
- Used to control the monitor with protocol
provided by TVLogic or to support TSL
protocol.
• [REMOTE] (RJ-45)
- Provides connection to control equipment for
external monitor control.
- Features can be changed in the REMOTE(1/2)
section of OSD menu.
• BATTERY IN
- Battery Power Input : DC 12V
* Rated Power Input : DC 12V (1.5A)
• DC POWER IN / TALLY (XLR 4P)
- DC power input terminal for DC 12V.
* When using a DC Adapter other than the one
supplied by the manufacturer, please be
advised that the adapter with DC 12V/3A ~ 6A
can be compatible with the monitor.
When using the product make sure to ground,
whenever possible, before connecting the
input signal cable in order to prevent any
possible damage to the product or connected
devices. The damage may include signal noise,
malfunction of main board or display panel.
And the connected devices such as camera or
video source player may also be influenced
through signal cable. Please check if the AC
power source and the power extender or
power distributor is grounded.
Connector Composite Component
S-Video
1
CVBS1
Pr
C
2
CVBS2
Y
Y
3
CVBS3
Pb
No Con.
• EXT.TALLY IN
- This terminal uesd to External tally input.
• [TALLY] Lamp
- Tally lamp that can be toggled in green or red
using the REMOTE(RJ-45) port.
• [SDI-IN A] (BNC)
- HD/SD SDI signal input terminal for SDI A.
• [SDI-OUT A] (BNC)
- HD/SD-SDI signal output terminal for SDI A
signal.
• [SDI-IN B] (BNC)
- HD/SD SDI signal input terminal for SDI B.
• [CVSBS1/Pr/R/S-C] (BNC)
- Signal input terminal used to feed themonitor
COMPOSITE 3, S-VIDEO C, COMPONENT Pr
and RGB R signals.
• [CVBS2/Y/G/S-Y] (BNC)
- Signal input terminal used to feed the monitor
COMPOSITE 1, S-VIDEO Y, COMPONENT Y and
RGB G signals.
• [CVSBS3/Pb/B] (BNC)
- Signal input terminal used to feed the monitor
COMPOSITE 2, RGB B and COMPONENT Pb
signals.
• AUDIO IN (phone jack)
- Internal speakers stereo audio input terminal.
• [HDMI] IN
- Signal input terminal for HDMI signal.
• [HDMI] OUT
- Signal output terminal for HDMI signal.