TVLogic LVM-084 - Manual (Page 7)

07
· REMOTE (RJ-45)
Connection for remote control of monitor.
· VGA IN / FACTORY PGM
Input connection for VGA mode and input connector for FACTORY PGM allowing for
firmware updates.
· CVBS1/Y/G/S-Y (BNC)
Signal input terminal used for COMPOSITE1, S-VIDEO Y, COMPONENT Y, RGB G signals.
· CVSBS2/Pb/B (BNC)
Signal input terminal used for COMPOSITE2, RGB B, COMPONENT Pb signals.
· CVSBS3/Pr/R/S-C (BNC)
Signal input terminal used for COMPOSITE3, S-VIDEO C, COMPONENT Pr, RGB R signals.
· SDI-IN (BNC)
SDI signal input terminals that provide A and B inputs.
· SDI-OUT (BNC)
SDI signal output terminal used for SDI output.
· DC 12V 1.5A IN (XLR, Male)
Used to supply DC power; 12V
· COOLING FAN
In order to prevent overheat, it affixed cooling fan.
· CHROMA/PHASE
Used to change the CHROMINANCE and PHASE values. Pressing the button once
will activate the CHROMA mode, pressing the button twice activates PHASE mode.
(PHASE may be used only with COMPOSITE and S-VIDEO on ANALOG mode.)
LVM-084