TVLogic LVM-084 - Manual (Page 16)

16
5. COLOR COPY mode can be used only in USER MODE. If user wants to change only
a specific value from standard mode, it will be a useful function. If the color temp. is
6500K, and user wants to change only the blue gain value, the user can COLOR COPY
function as following steps;
Select USER MODE among menus of COLOR TEMP, and set the COLOR COPY mode
set 6500K.
Select BLUE GAIN with UP/DOWN button and press enter.
Control BLUE GAIN and press ENTER.
3) REMOTE Mode Usage
This product provides a REMOTE CONTROL mode. The user may connect the
RJ-45 jack to the REMOTE terminal on the rear of the unit and designate a function
for each pin. The method for designating functions for pins is as follows:
1. Press MENU to call up the OSD menu.
2. Select REMOTE SETUP on MENU.
3. The REMOTE SETUP menu will be activated.
LVM-084