TVLogic LVM-084 - Manual (Page 17)

17
Menu Classification Settable Values
PIN 1~6
NONE, ANALOG CHANNEL
DIGITAL A,B CHANNEL
TALLY R,G , BLUE ONLY
SD 1:1 SCAN, UNDER SCAN
ASPECT, H/V DELAY
16:9,15:9,14:9,13:9 MARKER
4:3, 4:3 ON AIR MARKER
1.85:1, 2.35:1 MARKER
1.85:1&4:3 MARKER
CENTER MARKER
SAFETY AREA 80%, 88%
SAFETY AREA 90%, 93%
The user may designate functions for PIN1 ~ PIN 6. PIN7 is for POWER ON/OFF use only.
The selectable functions are as follows:
4. On the pin to be used, set the function you desire with the ENTER button and
UP/DOWN button. The method of setting the values is the same as that for the MENU
function discussed earlier.
Pin number designation is depicted below. Pin #8 should be left as the RJ-45 GND.
LVM-084