Toyotomi RCA-2800 - Manual (Page 10)

7. Remove the screw o
remove the bracket
knob.
8. Turn the stem clock
wick sleeve with wic
9. Turn the wick sleeve
sleeve with wick up.
Remove it from the p
10. Squeeze the wick t
the wick from the w
11. Install the wick to
allowed direction e
12. Install the wick s
tube. And then tur
the handle arm.
13. Install the wick
bracket. The wic
No.1. Then tighte
stem.
14. Put the wick adjus
ASSEMBLY AND OPERATION
REPLACING THE WICK
WARNING: Before disassembling your heater, allow it to cool completely.
1. To release the automatic extinguisher, push the manual shutoff
button.
2. After the heat chamber has cooled completely, open the grille and
remove the heat chamber.
3. Grasp the wick adjuster knob and pull it straight off the wick adjuster
shutoff.
4. Remove the batteries from the battery holder.
5. Lift out the removable fuel tank and set it aside.
Remove the three (3) screws at the side and rear of the cabinet by
using the screwdriver, and lift the cabinet off, bringing it slightly
forward.
6. Remove the four (4) wing nuts around the wick adjuster assembly.
Lift the assembly off the heater.
9
RCA-2800 Type C_US 14.7.10 11:17 ページ 9