Tempest Twister - Manual (Page 13)

Twister Enclosure User Manual page 13
4 Mounting the Luminaire in the Twister Enclosure
 If the Twister enclosure is suspended from a ceiling or overhang, this must be done by two people.
4.1 Mounting Smaller Luminaires without Omega Clamps
1. Remove the Fixture bracket from the enclosure base. Keep the fixture bracket mounting hardware safely for re-use.
2. Check that the open side of the Fixture bracket is facing you.
3. Using the fixture mounting hardware supplied with the luminaire, bolt through the underside of the bracket into the
threaded hole in the fixture base.
4. Replace the fixture bracket and the fixture on the Twister base, and tighten down the four fixing nuts.
Fixture Bracket
Fixture Bracket
mounting
hardware
Fixture mounting hardware