Tempest LIZA User Manual
Page 8
LIZA Enclosure User Manual
page 8
Tempest XYZ Mount
There are two types of Tempest XYZ mount, to attach either to a vertical pole or to a horizontal
pipe or stage truss. Either way, the XYZ mount allows precise positioning at any angle, with
adjustment for pan, tilt and roll.
1. Use a hammer and a screwdriver to remove the four ½” knockouts on top of the LIZA base
(see drawing above).
2. Using M12 or ½” hardware, bolt through the LIZA base to the slots on the Tempest XYZ
mount.
3. Hang the XYZ mount in accordance with the instructions supplied with it.
LIZA with Tempest XYZ Truss Mount.
Order Tempest Part # 6500.XYZ.T
LIZA with Tempest XYZ Pole Mount.
Order Tempest Part # 6500.XYZ