Tempest LIZA User Manual
Page 13
LIZA Enclosure User Manual
page 13
4. Lay the mounting frame over
the projector and adjust the
projector mounting bars to
align with the projector
mounting holes.
5. Using the mounting screw
plates as washers, screw the
mounting screws into the
projector base. Note that LIZA
comes with 20mm (3/4”)
mounting screws. Longer
screws are easily obtainable if
needed.
6.
Adjust the frame so that the
projector is centered and
tighten all screws.
7.
Attach the completed frame
and projector to the LIZA Base
and lock in place by swinging
the projector mount cams
back over the projector mount
bolt heads.
Projector Mount
Cam in closed
position