Tempest LIZA - Manual (Page 12)

LIZA Enclosure User Manual page 12
4 Mounting the Projector in the LIZA Enclosure
 This must be done by two people.
LIZA is equipped with an innovative and very robust universal projector mount that will safely support
any suitable projector, as well as offering precise fingertip alignment of pan, tilt and roll.
To mount the projector, first remove the LIZA projector frame:
1. Rotate each of the three blue projector mount cams so that they are clear of the projector
mount bolts
2. Lift the three bolts clear of the mounting hooks to remove the projector frame.
1. Set the projector top down (ceiling mode) on a flat surface. It may be
helpful to remove the projector feet wherever possible.
2. Determine the layout and thread type of the mounting holes in the
projector base. They are usually M4, M5, M6 or M8 (larger projectors).
3. Select the appropriate mounting screws from the LIZA hardware kit.
Locate the mounting screw plates (flat plates with three holes).
Projector Mount
Cam
Projector Mount
Hook
Projector Mount
Bolt
Projector Mount
Adjustment
Knob