Signamax Managed Hardened PoE Industrial DIN-rail Mount Switch - Manual (Page 70)

13 SNMP Manager
65
3.1.2 SNMP User
The User can manage the device via the management station software. You can configure the
SNMP User on this page.
User Name: Type the User Name here. It is a string of 3 to 16 characters.
Privilege: Select the privilege to be RO or RW.
SNMP V3 Encryption: Click to enable SNMP V3 Encryption. If SNMP V3 Encryption is not
selected, neither encryption nor authentication will be performed.
Auth Algorithm: Select the Authentication Algorithm for the SNMP v3 User.
MD5: The authentication is performed via HMAC-MD5 algorithm.
SHA: The authentication is performed via SHA (Secure Hash Algorithm). This authentication
mode has a higher security than MD5 mode.
Auth Password: Type the password for authentication. It is a string of 9 to 15 characters in
plain text, or a 32-bit hexadecimal number in cipher text if MD5 algorithm is used, or a 40-bit
hexadecimal number in cipher text if SHA algorithm is used.
Privacy Algorithm: Select the Privacy Algorithm for the SNMP v3 User.
Disable: No privacy method is used.
DES: DES encryption method is used.
AES: AES encryption method is used.
Privacy Password Type the privacy password. It is a string of 9 to 15 characters in plain text,
or a 32-bit hexadecimal number in cipher text if MD5 algorithm is used, or a 40-bit hexadecimal
number in cipher text if SHA algorithm is used.
The user list is displayed at the bottom, the users can be deleted.