Signamax 10/100/1000BaseT/TX to 100/1000Base SFP OAM Managed Switching Media Converter - Manual (Page 9)

Signamax
 OAM Managed Dual Rate Media Converter
User’s Manual 7
Reset Button
The reset button is used to reset the web-interface IP or
device settings.
Reset the device:
Insert a paper clip or a similar object into the reset hole to
press the reset button.
Reset the web-interface IP to 192.168.1.10:
Insert a paper clip or a similar object into the reset hole.
Press and hold the reset button for 5~10 seconds.
Reset to factory default:
Insert a paper clip or a similar object into the reset hole.
Press and hold the reset button for 10 seconds until the OAM
LOOP LED slowly blinks.