Signamax 10/100/1000BaseT/TX to 100/1000Base SFP OAM Managed Switching Media Converter - Manual (Page 17)

Signamax
 OAM Managed Dual Rate Media Converter
User’s Manual 15
Converter Configuration
• Jumbo Frame (9K): The media converter could pass the
max 9KB packet if enable this function.
• Link Transparent: If the Link Transparent (Link Fault
Signaling) is enabled, the Link Loss Carry Forward will be
active.
• Link Fault Pass Through: Choose “Disable” or “Enable”
this function to disable or enable Link Fault Signaling.
• Forward CRC Error Frame: The CRC error packets will
be passed if enable this function. Otherwise the CRC
error packets will be dropped.
• Forward Pause Frame: The media converter will forward
pause frame and regard it as a normal packet if enable
this function.
• Management Packet High Priority: Need to reset media
converter then this function will take effect. All
management packet will be allocated to high priority