Signamax 10/100/1000BaseT/TX to 100/1000Base SFP OAM Managed Switching Media Converter - Manual (Page 8)

Signamax
 OAM Managed Dual Rate Media Converter
6 User’s Manual
One-Channel Media Converter
Ports
This converter provides one TX port and one dual rate
100BaseFX/BX or 1000BaseSX/LX/BX fiber interface. For
the dual rate 100BaseFX/BX or 1000BaseSX/LX/BX fiber
interface, it provides options of multi-mode/single-mode or
WDM multi-mode/single-mode fiber. For the TX port, it uses
RJ-45 connector and supports auto MDIX for uplink purpose.
Front Panel & LEDs
LED Indicators
The LED indicators give you instant feedback on status of the
converter:
LED’s State Indication
PWR (Green)
Steady
Power On
PWR stands for Power
Off Power Off
Copper Port
Speed
Steady Green: Copper Port connection at the speed of 1000Mbps
Amber: Copper Port connection at the speed of 100Mbps
Off Copper Port connection at the speed of 10Mbps
LNKC (Green)
Steady A valid network connection is established on FX port
Flashing Data transmitting
OAM LOOP
(Green)
Steady When device in OAM Active Mode
Flashing Blinks for 4 seconds if loopback testing pass, when
device in OAM Passive Mode
GE
Steady Fiber port connection at the speed of 1000Mbps
Off Fiber port connection at the speed of 100Mbps
LNKF (Green)
Steady A valid network connection is established on FX port
Flashing Data transmitting
LFS (Green)
Steady
LFS function enabled
LFS stands for Link Fault Signaling
Off LFS function disabled