Signamax 10/100/1000BaseT/TX to 100/1000Base SFP OAM Managed Switching Media Converter - Manual (Page 19)

Signamax
 OAM Managed Dual Rate Media Converter
User’s Manual 17
Port Configuration
• Mode: Click “Mode” drop-down menu to choose “Auto
Speed”, “1000 Full”, “100 Full”, “100 Half”, “10 Full”, “10
Half” from the “Mode” drop-down list for TP port. And
click “Mode” drop-down menu to choose “Auto Speed”,
“1000 Full”, “100 Full” from the “Mode” drop-down list for
FX port.
• Flow Control: Click “Flow Control” drop-down menu to
choose “Disable” or “Enable” from the “Flow Control”
drop-down list to disable or enable Flow Control for TP or
FX port.
• Ingress Rate Limit (kbps): Click “Ingress Rate Limit”
drop-down menu to choose the ingress rate limit from the
“Ingress Rate Limit” drop-down list for TP or FX port. Or
click “Ingress Rate Limit” drop-down menu to choose the
“User Setting” from the “Ingress Rate Limit” drop-down
list for TP or FX port. Then click in “Ingress Rate Limit”
text box and type an ingress rate limit for TP or FX port.
The ingress rate limit should be divided exactly by 64
because 64kbps is as a minimal step for ingress rate limit.
The program will change the ingress rate limit to 64