beautypg.com

One-channel ethernet extender – Signamax 10/100BaseT/TX Ethernet Extender Media Converter User Manual

Page 8

background image

Industrial Ethernet Extender

8

One-Channel Ethernet Extender

Ports

The Ethernet Extender provides one TX port and one Ethernet Extender
port.
For the TX port, it uses RJ-45 connector and auto senses the speed of
10/100 Mbps.
For the Ethernet Extender port, it uses RJ-11 connector and auto senses
the speed of 1/3/5/10/15/20/25/30/40/50Mbps.

Ethernet Extender Mode Settings

Ethernet Extender mode settings are made very simple by means of a 2
position switch at the rear panel of the Ethernet Extender.

Mode switch

There is one position on the Mode switch for Ethernet Extender mode
settings. Refer to the table below for more details. One end must be set to
Loc and the other to Rmt when two devices are connected.

Loc

Rmt

The device operates in local mode

The device operates in remote mode

Front Panel & LEDs

LED Indicators

The LED indicators give you instant feedback on status of the Ethernet
Extender: