Specifications – Proceed CVP2 User Manual
Page 31
31
Specifications
■
Pass-through gain
:
+0.0 dB, - 0.2 dB
■
Pass-through frequency response
:
+0.25 dB, - 3.0 dB to 70 MHz
■
Pass-through differential gain
:
less than 0.2%
■
Pass-through differential phase
:
less than 0.2
°
■
Decode/encode path gain
:
±0.2 dB
■
Decode/encode path frequency response
:
Composite & S-video inputs
+0.2dB, -1.0 dB to 5.0 MHz
Component inputs
+0.2dB, -0.5 dB to 5.0 MHz
■
Decode/encode path differential gain
:
To Composite output
less than 2%
■
Decode/encode path differential phase
:
To Composite output
less than 1
°
■
Decoder composite input filter
:
4 line adaptive comb filter
■
Composite & S-video inputs
:
NTSC or PAL, autodetecting
■
SD Component YP
b
P
r
inputs for decoding
:
SMPTE standard levels
Y channel
-300 mV sync, +700 mV peak
P
b
/P
r
channels
±350 mV
Field rate
50 or 60 Hz interlaced, autodetecting
■
SD Component RG
s
B inputs for decoding
:
G channel
-300 mV sync, +700 mV peak
B/R channels
+700 mV peak with or without sync
Field rate
50 or 60 Hz interlaced, autodetecting
■
Maximum input signal offset, all inputs
:
±2VDC
■
Input impedance, all inputs
:
75
Ω
■
SD encoded YP
b
P
r
output levels
:
SMPTE levels
■
SD encoded R
s
G
s
B
s
output levels
:
w/60 Hz input
-286 mV sync all channels, +714 mV peak
offset +337 mV
w/50 Hz input
-300 mV sync all channels, +700 mV peak
offset +352 mV
■
Output impedance
:
75
Ω
■
Crosstalk
:
better than -55 dB @ 10 MHz
better than -45 dB @ 35 MHz
■
RS-232 “to controller” port
:
Baud rate
38.4 kbaud
Data bits
8
Parity
None
Stop Bits
1
Data format
AVP2 ASCII commands only
(see AVP2 documentation)
Pinout
Tx=pin 3
Rx=pin 2
Ground=pin 5
(continued next page)