Presentation Switchers PS510 - Manual (Page 5)

Page 5 Series 500 Installation Guide
Getting Started
Installation Guide Overview Installation Guide Overview
This manual will provide detailed instruc ons to assist an installer with a typical under table in-
stalla on of a PS510 presenta on switcher. This process is best outlined by the following steps.
1. Unpack the switcher from the box and separate all components.
2. Install input cards (if necessary)
3. Locate and pre-drill moun ng holes.
4. Mount the switcher under the table.
5. A ach input and output devices to the switcher.
6. Power up the unit and test the unit manually.
7. Make adjustments to the system as necessary.
8. Test the system again using external control devices as necessary.
Package Contents Package Contents
Below is a list of items enclosed in each Series 500 enclosure.
Quantity Description
1 PS510 Presentation Switcher
1 Installation Guide (PN: DOC-000005-xxx) (This manual)
1 5 Connector Terminal Block Stereo Audio Connector, Line Level Audio
6 Wood Screws, #6 X 3/4”, Pan-Head, Philips
1 Power Cord (US Only)
Installation Tools Installation Tools
• Drill
• 3/32” Drill Bit for So wood or 7/64” Drill Bit for Hardwood
• #2 Philips Head Screw Driver
• 1/8” Flat Blade “Tweeker” Screw Driver