Presentation Switchers PS510 - Manual (Page 15)

Page 15 Series 500 Installation Guide
The PS510 has a simple control system for controlling a display device (LCD, Plasma, or Projec-
tor). The serial port is connected directly to the display device. Codes are uploaded and stored
in the Series 500. When the system is inac ve and an input source is selected the projector
is sent a “power on” command. When the signal is lost and a predetermined amount of me
passes, the Series 500 issues a “power down” command.
Main Form Main Form
PS500 Display Control
Power On Codes
Power Off Codes
Input Select Code
Serial Speed of
Display
Time to Wait with
No Signal Before
Shutting Down
Projector / LCD
Bulb Life Fail Safe
Upload to the
Switcher
Read from the
Switcher
Enter Codes in Text
or HEX