Paxton Superchargers Universal Small Block Mopar/318 Carbureted System - Manual (Page 18)

5-2
P/N: 4809658
©2006 Paxton Automotive
All Rights Reserved, Intl. Copr. Secured
23MAR06 v1.0 UnivSBMCarb(4809658v1.0)
H. Locate the S/C support bracket and one of
the 1"OD x 1.755" long spacers provided.
Loosely attach the support bracket to the
S/C bracket by placing the provided 3/8-16
x 3.25" bolt and washer through the S/C
bracket, spacer and then attaching the sup-
port bracket. Secure using the 3/8-16 nyloc
nut and washer provided. (See Fig. 5.1-b,
5.1-d.)
I Locate te remaining two 1"OD x 1.755"
long spacers and the two 1"OD x 1.321"
spacers. Secure these by installing the two
3/8-16 x 4.5" bolts and washers through the
S/C bracket, 1.755" long spacers, support
bracket, 1.321" spacers and into the cylinder
head. (See Figs. 5.1-b, 5.1-e.)
J Using the factory alternator hardware and
the .625"OD x 1.755" long spacer provided,
install the alternator as shown. (See Figs.
5.1-f, 5.1-g.)
Fig. 5-f
Fig. 5-.1-g
Fig. 5-d
Fig. 5-e
SUPPORT
BRACKET
ALTERNATOR
.625"OD x 1.755"
LONG SPACER
S/C BRACKET
FACTORY
HARDWARE
1"OD x
1.755"L SPACER
FACTORY
HARDWARE
ALT. STAY
ADJUSTING BOLT
SUPPORT
BRACKET
FACTORY
ALT. STAY
1"OD x 4.276"
SPACER
1"OD x 4.255"
SPACERS
1"OD x 1.321"
SPACERS