Oxmoor DEQ-1 - Manual (Page 27)

Page 25
This section lists the DEQ-II error messages with brief de-
scriptions of their meanings and possible corrective actions.
“Com... Time-out -Device Not Responding” - The
DEQ you have attempted to communicate with is not
responding. Check the wiring to that unit. Make sure
that the unit is ON. Make sure that the unit has the
correct address.
“Illegal Device Type Returned” - The device you
have tried to communicate with is not a DEQ 1/3-
octave equalizer. Check the unit at that address.
“Incorrect Address ID Returned” - The remote device
has returned an address that does not match the
address you tried to select. Check your wiring. Make
sure that each equalizer has a unique address.
“Invalid Password - Access Denied” - Your password
does not match the password of the remote device.
You may not communicate with this device until you
know its password.
“Preset Locked - Access Denied” - The Preset you
have tried to modify is locked. You must unlock the
Preset before you can modify it.
"Incorrect ID Code Returned" - The remote device has
returned an ID code other than Oxmoor's. This
indicates that the unit you have addressed is not an
Oxmoor Product. Check your address settings on the
remote devices.
"Parity Error" - A parity error was present in the
command or data sent to the remote device. Check
your cabling and make sure that each device has a
unique address.
"Bad Data Received By Remote" - The remote device
has received data that is invalid. Check the wiring and
addresses.
"Bad Command Received By Remote" - The remote
device has received a command that is invalid. Check
the wiring and addresses.
This section lists the valid characters in the DEQ
character set.
Character Character
Number
1 ................... SPACE
2 ........................ A
3 ........................ B
4 ........................ C
5 ........................ D
6 ........................ E
7 ......................... F
8 ........................ G
9 ........................ H
10 ........................ I
11 ........................ J
12 ....................... K
13 ....................... L
14 ....................... M
15 ....................... N
16 ....................... O
17 ....................... P
18 ....................... Q
19 ....................... R
20 ........................ S
21 ....................... T
22 ....................... U
23 ....................... V
24 ....................... W
25 ....................... X
26 ....................... Y
27 ....................... Z
28 ........................ 0
29 ........................ 1
30 ........................ 2
31 ........................ 3
32 ........................ 4
33 ........................ 5
34 ........................ 6
35 ........................ 7
36 ........................ 8
37 ........................ 9
38 ........................ $
39 ....................... %
40 ........................ ‘
41 ........................ -
42 ....................... @
43 ....................... ~
44 ........................ '
45 ........................ !
46 ........................ #
47 ........................ (
48 ........................ )
49 ....................... &
APPENDIX B: ERROR MESSAGES APPENDIX C: CHARACTER SET