One Systems Cross Field Array – 2 User Manual
Page 9
The kit consists of:
1ea. Band-it AE4779 All Purpose Band 316SS (Black Coated) 475mm long
2ea. M8 304 grade stainless steel bolts
1ea. M8 304 grade stainless steel nylon insert nut
3 ea. 304 flat washers
1 ea. Lock washer
The M8 fitting is located between the M10 points.
NOTE: The M8 point should NOT be used for rigging.
The M8 point is to be used to mount the hardware kit ONLY!
THE CENTER HOLE IN THE U BRACKET IS FOR CONNECTING THE STRAP
ONLY! DO NOT USE THE CENTER M8 HOLE IN THE U BRACKET FOR
MOUNTING OR SUSPENDING THE ENCLOSURE!!!
The “U” bracket kit is shown installed above and a close up below.