One Systems Cross Field Array – 2 User Manual
Page 8
The supplied “U” bracket requires the enclosure be suspended “upside down”
with the high frequency section positioned near the bottom of the front baffle. The
“U” bracket will allow adjustment in the vertical axis (tilt) only. See the image
below.
NOTE: THE CENTER HOLE IN THE U BRACKET IS FOR THE PULL
BACK STRAP ONLY! THIS HOLE MUST NOT BE USED FOR MOUNTING OR
SUSPENSION!
CFA-2 orientation for external “U” bracket (supplied)
The CFA-2 is supplied with the external “U” bracket and a hardware kit to allow
the enclosure to be tilted back and locked into position. This kit prevents wind
loading and “gravity sag” from altering the required down tilt angle of the
enclosure