One Systems Cross Field Array – 2 - Manual (Page 4)

Dimensions (H x W x D) mm: 876.5 x 572.6 x 446.3*
Inches: 34.5 x 22.5 x 17.6
* Height is for enclosure only (Height does not include U bracket)
Net Weight: 60.6 kg (133.6 lbs)
63.6kg (140.2lbs) with External “U” bracket
Included Accessories Stainless Steel “U” Bracket and strap kit
Optional Accessories/Products Pole Mount System EX-3 (new 2012)
PT-76 (new 2012)
M10 Forged Shoulder Eye Bolt Kit
SF-4 High Pass Filter (new 2012)
CONFIGURING THE CFA-2
NOTE: The One Systems CFA-2 has a factory installed 600 watt autoformer.
The CFA-2 may be configured to present either a “Low Impedance” (4 ohm) or
“High Impedance” load to the amplifier. The CFA-2 is wired at the factory for 4
ohm operation. If a “High Impedance” configuration is required, the crossover
input cup must be removed and the configuration jumpers must be moved as
shown below.
For Low Impedance (4 ohms) all jumpers must be in POSITION 2.
For High Impedance (either 70.7Vrms or 100Vrms) all jumpers must be in
POSITION 1.
THE INPUT WEATHER COVER MUST BE USED FOR ALL CFA-2
INSTALLATIONS, REGARDLESS OF SYSTEM INPUT IMPEDANCE!