NEXCOM NSA 5130 - Manual (Page 91)

Copyright © 2011 NEXCOM International Co., Ltd. All Rights Reserved. 78 NSA 5130 User Manual
Chapter 4: BIOS Setup
Initiate Graphic Adapter
Selects the graphics controller to use as the primary boot device.
IGD Memory
Selects the IGD shared memory size.
Render Standby
Enables or disables the Render Standby of the internal graphics device.
IGD Multi-Monitor
Enables or disables the IGD Multi-Monitor of the internal graphics device.
PCI Express Port
Enables or disables the PCI Express port.
PEG Force Gen1
Enables or disables the PCI Express port Force Gen1.
Detect Non-Compliance Device
Enables or disables the detection of non-compliance devices.
MRC Message Print
Enables or disables the print memory initialize message.
South Bridge
BIOS SETUP UTILITY
Version 2.11.1210. Copyright (C) 2011 American Megatrends, Inc.
← → Select Screen
↑↓ Select Item
+- Change Option
F1 General Help
F10 Save and Exit
ESC Exit
SB Chipset Configuration
SMBus Controller [Enabled]
GbE Controller [Enabled]
Wake On LAN from S5 [Enabled]
Power Supply Type [ATX]
Restore AC Power Loss [Power On]
SLP_S4 Asstion Stretch Enable [Enabled]
SLP_S4 Assertion Width [4-5 Seconds]
Deep Sx [Disabled]
High Precision Event Timer Configuration
High Precision Timer [Enabled]
u PCI Express Ports Configuration
u USB Configuration
Chipset
Enabled/Disabled
SMBus Controller.
SMBus Controller
Enables or disables the SMBus controller.
GbE Controller
Enables or disables the GbE controller.
Wake On LAN from S5
Enables or disables the GbE control PME in S5.