NEXCOM NSA 5130 User Manual

Page 18

NSA 5130 User Manual

Chapter 1: Product Introduction

System Management
• Watchdog
- Watchdog timeout is programmable by software from 1 second/min.

to 256 sec. (from Winbond W83627 Super I/O)

• System Monitor
- Monitors voltages (system temperature sensor, monitors system volt-

age, monitors battery voltage, monitors fan speed of system and
module) (W83792 monitor chip)

- Fan speed controller: 2 fan connectors with fan speed control function

I/O Port
• Internal I/O
- Serial ports: two reserved 2x5 2.0mm box headers (COM1 and COM2)
- USB ports: one 1x6 2.0mm JST connector
- SATA ports: three SATA ports
- PS/2 keyboard/mouse: one 2x4 2.54mm pin header
- GPIO: one 2x2 2.0mm pin header
• Rear I/O
- 1x PCIe x16 slot for a x8 slot on the riser card
- 1x VGA port
- 2x USB ports

• Front I/O
- 2x USB ports
- 1x RJ45 type console port
- 8x RJ45 copper LAN ports
- Power status / HDD status / LAN status / Bypass status LED
- 1x GPIO software button
- 1x LAN module bay (optional)

Expansion
• PCI Express
- One PCIe x8 slot on the riser card

Power
• Connector type
- ATX power connector
• Power mode
- AT mode (default), ATX mode
Use the jumper to change the setting. The BIOS can auto detect the

power mode status.

BIOS
• Flash ROM
- 64MB (SPI)
• Type
- AMI BIOS