Replacing the lan module – NEXCOM NSA 5130 User Manual

Page 64

Text mode
Original mode

NSA 5130 User Manual

Chapter 3: System Setup

Replacing the LAN Module

The system is equipped with 1 LAN module bay. To remove and replace the
LAN module, please follow the instructions below.

Cover plate

LAN module

bay

Mounting screw

Please correctly follow the below instructions and noted items
to avoid making unnecessary damages. Make sure the power
supply is switched off and disconnected from the power
sources before replacing or adding LAN modules to prevent
electric shock or system damage.

1. Remove the mounting screws on the cover plate of the LAN module.

2. On each side of the chassis, remove the mounting screws securing the

front panel.

Only plug approved mini-GBIC module into the slot.