NEXCOM NSA 5130 - Manual (Page 82)

Copyright © 2011 NEXCOM International Co., Ltd. All Rights Reserved. 69 NSA 5130 User Manual
Chapter 4: BIOS Setup
Thermal Configuration
This section is used to configure the intelligent power sharing function.
BIOS SETUP UTILITY
Version 2.11.1210. Copyright (C) 2011 American Megatrends, Inc.
Thermal Configuration
ME SMBus Thermal Reporting
Thermal Data Reporting
SMBus Buffer Length
Thermal Reporting EC PEC
PCH Temp Read
Selects Slots with TS on DIMM
Thermal Sensor on DIMM0
Thermal Sensor on DIMM1
Thermal Sensor on DIMM2
Thermal Sensor on DIMM3
Alert Enable Lock
PCH Alert
DIMM Alert
Advanced
[Enabled]
[Enabled]
[20]
[Disabled]
[Enabled]
[Disabled]
[Disabled]
[Disabled]
[Disabled]
[Disabled]
[Disabled]
[Disabled]
→ ←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save ESC: Exit
Enabled/Disabled ME
SMBus Thermal Reporting
Configuration.
ME SMBus Thermal Reporting
Enables or disables the ME SMBus thermal reporting configuration.
Thermal Data Reporting
Enables or disables the thermal data reporting.
SMBus Buffer Length
Selects the length of SMBus block read message for EC.
Thermal Reporting EC PEC
Enables or disables the Packet Error Checking (PEC) for SMBus block
read.
PCH Temp Read
Enables or disables the PCH temperature read.
Thermal Sensor on DIMM0 to Thermal Sensor on DIMM3
Enables or disables the thermal sensor.
Alert Enable Lock
Locks all alert enable settings.
PCH Alert
Enables or disables the PCH alert.
DIMM Alert
Enables or disables the DIMM alert.