Removing the external battery – NEXCOM MRC 1000 User Manual

Page 40

Text mode
Original mode

MRC 1000 Series User Manual

Chapter 5: Expanding Your Tablet PC

2. Line up the charging pins on the auxiliary battery with the charging pins

in the auxiliary battery connector bay.

3. Connect the auxiliary battery to the system using the captive screws in

the auxiliary battery.

Removing the External Battery

Repeat the above steps in reverse order to remove the battery.

Note: The MRC 1000 does not have an auxiliary battery
attached, the auxiliary battery connector cover is in place
to protect the Marathon auxiliary battery connector from
opening.

This manual is related to the following products:

MRC 1100