NEXCOM MRC 1000 User Manual
Page 23
Copyright © 2013 NEXCOM International Co., Ltd. All Rights Reserved.
10
MRC 1000 Series User Manual
Chapter 2: Getting Started
3. Push the SIM card holder up (in the direction of the word OPEN on the
holder) to release the lock.
7. Replace the battery in the battery well.
8. Replace the battery cover, securing it with the original 4 screws.
4. Slide a SIM card into the slot using the guides on the inside of the slot. Do
not remove the SIM card holder.
5. The angled corner of the SIM card ensures that the card fits the correct
way in the slot.
6. Slide the SIM card holder down (in the direction of the word LOCK on the
holder) to lock the SIM card flat in the opening (LOCK).
This manual is related to the following products: