Key features, Hardware specifications – NEXCOM VTC 6100 User Manual

Page 17

VTC 6100 User Manual

Chapter 1: Product Introduction

Key Features

• Fanless design with ruggedized aluminum chassis
• 2 Mini PCI Express and 1 PCI-104 expansions
• Wide range DC input from 6V to 36V
• Power ignition on/off delay controlled by software
• Low battery power protection setting by software
• External smart battery back-up support
• S3 & S4 suspend mode support
• Availability of GPS, GPRS/UMTS/HSDPA
• Multiple display connections thru VGA, DVI-D and LVDS
• Optional IP65 enclosure
• e13 Mark certification

Hardware Specifications

COM Express CPU Module (ICES 270)
• ATOM N270 CPU 1.6GHz
• VGA/PCI/PCIe/LVDS/Audio/COM/LPT/USB2.0/LAN interface
Memory
• Supports DDR2 400/533 non-ECC, non-registered SDRAM
• One 200-pin SO-DIMM supports up to 2GB memory
Chipset
• Intel 945GSE / ICH7M
Expansion
• 2 Mini PCI Express slots
- 1 x (PCIe + USB) for WLAN card
- 1 x PCIe for HSDPA module or GPRS module
• 1 PCI-104 slot

I/O Interfaces - Front
• Logo plate
• 1 x Power button (w/ LED)
• 1 x Reset button
• 1 x SIM card socket
• 1 x USB 2.0
• 1 x Power LED
• 1 x HDD LED
• 1 x GPIO LED - programmable for alarm or other application specific

purposes

• 1x LED for COMM (WLAN/HSDPA) status
• Antenna mounting holes for 4x SMA-type (WLAN, HSDPA and GPS)
• 1 x Line-out
• 1 x Mic-in
I/O Interfaces - Rear
• COM ports
- 1 x DB9 COM1 RS232/ or 1 x DB15 Odo. Sensor (VTC6100-DK)
- 1 x DB9 COM2 RS232
- 1 x DB9 COM3 RS232/485 w/ auto flow control
• 1 x DB26 LVDS (w/ +12V for backlight power and USB2.0)
• 1 x DB15 VGA
• 1 x DVI-D
• 2 x USB
• 1 x Realtek 10/100/1000 Ethernet
• 2 x Mic-in and 2 Line-out (ALC888-VC2-GR HD Codec, AC’97 Compatible)