Installing a wwan module – NEXCOM VTC 100 User Manual

Page 37

VTC 100 User Manual

Chapter 3: System Setup

Mini PCI-E slot for WWAN module

installation

1. The Mini PCI Express slot shown below is used to install a WWAN

communication module such as GPRS, UMTS or HSDPA.

Installing a WWAN Module

2. Insert the module into the Mini PCI Express slot at a 45 degrees angle

until the gold-plated connector on the edge of the module completely
disappears inside the slot.

3. Push the module down then secure it with mounting screws.

4. Attach one end of the RF cable onto the module.

5. Mount the other end of the cable to the antenna mounting hole

located at the front panel of the chassis.