Boot save & exit, Boot, Save & exit – NEXCOM NDiS M324 User Manual

Page 64

NDiS M324 User Manual

Chapter 4: BIOS Setup

Boot

This section is used to configure the boot features.

Bootup NumLock State
This allows you to determine the default state of the numeric keypad. By
default, the system boots up with NumLock on wherein the function of the
numeric keypad is the number keys. When set to Off, the function of the
numeric keypad is the arrow keys.

Boot Option Priorities
Adjust the boot sequence of the system. Boot Option #1 is the first boot
device that the system will boot from, next will be #2 and so forth.

Advanced

Security

Boot

Save & Exit

Main

→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit

Select the keyboard NumLock
state

Boot Settings Configuration

Bootup NumLock State

Boot Option Priorities

Boot Option #1

[On]

[UEFI: Built-in EFI . . .]

Save & Exit

Advanced

Boot

Security

Save & Exit

Main

→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit

Reset the system after

saving the changes.

Save Changes and Exit

Discard Changes and Exit

Restore Defaults

Save & Exit

Save Changes and Exit

To save the changes and exit the Setup utility, select this field then press

. A dialog box will appear. Confirm by selecting Yes. You can also

press to save and exit Setup.

Discard Changes and Exit

To exit the Setup utility without saving the changes, select this field then

press . You may be prompted to confirm again before exiting. You

can also press to exit without saving the changes.

Restore Defaults

To restore the BIOS to default settings, select this field then press . A

dialog box will appear. Confirm by selecting Yes.