Socket 0 cpu information, Ide configuration – NEXCOM NDiS M324 User Manual
Page 57
Copyright © 2013 NEXCOM International Co., Ltd. All Rights Reserved.
43
NDiS M324 User Manual
Chapter 4: BIOS Setup
Hardware Prefetcher
Turns on or off the mid level cache (L2) streamer prefetcher.
Adjacent Cache Line Prefetch
Turns on or off prefetching of adjacent cache lines.
Intel
®
Virtualization Technology
When this field is set to Enabled, the VMM can utilize the additional
hardware capabilities provided by Vanderpool Technology.
Socket 0 CPU Information
This section displays the information of the CPU installed in Socket 0.
Exit
Advanced
Chipset
PCIPnP
Security
Main
Version 2.16.1242. Copyright (C) 2013 American Megatrends, Inc.
Aptio Setup Utility - Copyright (C) 2013 American Megatrends, Inc.
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
Socket specific CPU Information
Socket 0 CPU Information
Intel(R) Celeron(R) CPU J1900 @ 1.99GHz
CPU Signature
30673
Microcode Patch
320
Max CPU Speed
1990 MHz
Min CPU Speed
1334 MHz
Processor Cores
4
Intel HT Technology
Not Supported
Intel VT-x Technology
Supported
L1 Data Cache
24 kB x 4
L1 Code Cache
32 kB x 4
L2 Cache
1024 kB x 2
L3 Cache
Not Present
Advanced
Boot
Security
Save
&
Exit
Main
Version 2.16.1242. Copyright (C) 2013 American Megatrends, Inc.
Aptio Setup Utility - Copyright (C) 2013 American Megatrends, Inc.
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
Select IDE / AHCI
IDE Configuration
SATA Mode
SATA Port0
Not Present
[AHCI Mode]
IDE Configuration
This section is used to configure the IDE drives.
SATA Mode Selection
Configures the SATA as IDE or AHCI mode.
IDE
This option configures the Serial ATA drives as Parallel ATA
physical storage device.
AHCI This option configures the Serial ATA drives to use AHCI
(Advanced Host Controller Interface). AHCI allows the storage
driver to enable the advanced Serial ATA features which will
increase storage performance.