Console redirection settings – NEXCOM NDiS M324 User Manual

Page 55

NDiS M324 User Manual

Chapter 4: BIOS Setup

Console Redirection Settings

Specifies how the host computer and the remote computer (which the
user is using) will exchange data. Both computers should have the same or
compatible settings.

Console Redirection
Enables or disables the console redirection.

Terminal Type
ANSI

Extended ASCII character set.

VT100 ASCII character set.
VT100+ Extends VT100 to support color, function keys, etc.
VT-UTF8 Uses UTF8 encoding to map Unicode characters onto 1 or more

bytes.

Bits Per Second
Selects the serial port transmission speed. The speed must match the other
side. Long or noisy lines may require a lower speed.

Data Bits
The options are 7 and 8.

Parity
A parity bit can be sent with the data bits to detect some transmission
erros.

Even

Parity bit is 0 if the number of 1’s in the data bits is even.

Odd

Parity bit is 0 if number of 1’s in the data bits is odd.

Stop Bits
Stop bits indicate the end of a serial data packet. (A start bit indicates the
beginning). The standard setting is 1 stop bit. Communication with slow
devices may require more than 1 stop bit.

Flow Control
Flow control can prevent data loss from buffer overflow. When sending data
and the receiving buffers are full, a “stop” signal can be sent to stop the
data flow.

VT-UTF8 Combo Key Support
Enables or disables VT-UTF8 combination key support for ANSI/VT100
terminals.

Recorder Mode
When this field is enabled, only text will be sent. This is to capture the
terminal data.

Exit

Advanced

Chipset

PCIPnP

Security

Main

→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit

Emulation: ANSI: Extended
ASCII char set. VT100: ASCII

char set. VT100+: Extends
VT100 to support color, function
keys, etc. VT-UTF8: Uses UTF8

encoding to map Unicode chars

onto 1 or more bytes.

COM0

Console Redirection Settings

Terminal Type

Bits per second

Data Bits

Parity

Stop Bits

Flow Control

VT-UTF8 Combo Key Support

Recorder Mode

Resolution 100x31

Legacy OS Redirection Resolution

Putty KeyPad

Redirection After BIOS POST

[ANSI]

[115200]

[8]

[None]

[1]

[None]

[Enabled]

[Disabled]

[Enabled]

[80x24]

[VT100]

[Always Enable]