NEXCOM NViS 2280 User Manual
Page 90
Copyright © 2012 NEXCOM International Co., Ltd. All rights reserved
77
NViS 2280 User Manual
Chapter 3: System Setup
Discard Changes and Reset
To exit the Setup utility without saving the changes, select this field then
press
Save Changes
To save changes and continue configuring the BIOS, select this field then
press
Discard Changes
To discard the changes, select this field then press
will appear. Confirm by selecting Yes to discard all changes made and
restore the previously saved settings.
Restore Defaults
To restore the BIOS to default settings, select this field then press
A dialog box will appear. Confirm by selecting Yes.
Save as User Defaults
To use the current configurations as user default settings for the BIOS,
select this field then press
selecting Yes.
Restore User Defaults
To restore the BIOS to user default settings, select this field then press
Boot Override
To bypass the boot sequence from the Boot Option List and boot from a
particular device, select the desired device and press
Launch EFI Shell from filesystem device
To launch EFI shell from a filesystem device, select this field and press