NEXCOM NViS 2280 - Manual (Page 89)

Copyright © 2012 NEXCOM International Co., Ltd. All rights reserved 76 NViS 2280 User Manual
Chapter 3: System Setup
Security
Administrator Password
Select this to reconfigure the administrator’s password.
User Password
Select this to reconfigure the user’s password.
Save & Exit
Save Changes and Exit
To save the changes and exit the Setup utility, select this field then press
. A dialog box will appear. Confirm by selecting Yes. You can also
press to save and exit Setup.
Discard Changes and Exit
To exit the Setup utility without saving the changes, select this field then
press . You may be prompted to confirm again before exiting. You
can also press to exit without saving the changes.
Save Changes and Reset
To save the changes and reset, select this field then press . A dialog
box will appear. Confirm by selecting Yes.