beautypg.com

NEXCOM NViS 2280 User Manual

Page 81

background image

Copyright © 2012 NEXCOM International Co., Ltd. All rights reserved

68

NViS 2280 User Manual

Chapter 3: System Setup

Super IO Configuration

This section is used to configure the serial ports.

Super IO Chip

Displays the Super I/O chip used on the board.

Serial Port 0 Configuration

This section is used to configure serial port 0.

Serial Port

Enables or disables the serial port.

Change Settings

Selects an optimal setting for the Super IO device.

Onboard Serial Port 0 Mode

Select this to change the serial port mode to RS232, RS422 or RS485.

Onboard Serial Port Max Baud Rate

Select this to change the max baud rate of the serial port.