NEXCOM NViS 2280 - Manual (Page 79)

Copyright © 2012 NEXCOM International Co., Ltd. All rights reserved 66 NViS 2280 User Manual
Chapter 3: System Setup
SATA Configuration
This section is used to configure the SATA drives.
SATA Mode
IDE This option configures the Serial ATA drives as Parallel ATA
physical storage device.
RAID This option allows you to create RAID or Intel Matrix Storage
configuration on Serial ATA devices.
AHCI This option configures the Serial ATA drives to use AHCI
(Advanced Host Controller Interface). AHCI allows the storage
driver to enable the advanced Serial ATA features which will
increase storage performance.
Serial-ATA Controller 0/1
Set the Serial-ATA controller 0 and 1 to Compatible or Enhanced mode.