beautypg.com

NEXCOM NViS 2280 User Manual

Page 87

background image

Copyright © 2012 NEXCOM International Co., Ltd. All rights reserved

74

NViS 2280 User Manual

Chapter 3: System Setup

Restore AC Power Loss

Power Off

When power returns after an AC power failure, the
system’s power is off. You must press the power button to
power-on the system.

Power On

When power returns after an AC power failure, the system
will automatically power-on.

Last State

When power returns after an AC power failure, the system
will return to the state where you left off before power
failure occurs. If the system’s power is off when AC power
failure occurs, it will remain off when power returns. If the
system’s power is on when AC power failure occurs, the
system will power-on when power returns.

USB Configuration

All USB Devices

Enables or disables all USB devices.

USB 2.0(EHCI) Support

Enables or disables USB 2.0(EHCI) support.

EHCI Controller 1/2

Enables or disables EHCI controllers 1 to 2.

UHCI Controller 1/6

Enables or disables UHCI controllers 1 to 6.