NEXCOM PEAK 887VL2 - Manual (Page 53)

Copyright © 2013 NEXCOM International Co., Ltd. All Rights Reserved. 39 PEAK 887VL2 User Manual
Chapter 3: BIOS Setup
Security
Save & Exit Advanced Chipset Boot Security Main
Version 2.15.1236. Copyright (C) 2012 American Megatrends, Inc.
Aptio Setup Utility - Copyright (C) 2012 American Megatrends, Inc.
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
Set Administrator Password Password Description
If ONLY the Administrator’s password is set,
then this only limits access to Setup and is
only asked for when entering Setup.
If ONLY the User’s password is set, then this
is a power on password and must be entered to
boot or enter Setup. In Setup the User Will
have Administrator rights.
The password length must be
in the following range:
Minimum length 3
Maximum length 20
Administrator Password
User Password
Administrator Password
Select this to reconfigure the administrator’s password.
User Password
Select this to reconfigure the user’s password.
Save & Exit Advanced Chipset Boot Security Main
Version 2.15.1236. Copyright (C) 2012 American Megatrends, Inc.
Aptio Setup Utility - Copyright (C) 2012 American Megatrends, Inc.
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
Reset the system after
saving the changes.
Save Changes and Reset
Discard Changes and Reset
Restore Defaults
Save & Exit
Save Changes and Reset
To save the changes and reset, select this field then press . A dialog
box will appear. Confirm by selecting Yes.
Discard Changes and Reset
To exit the Setup utility and reboot the system without saving the changes,
select this field then press . You may be prompted to confirm again
before exiting.
Restore Defaults
To restore the BIOS to default settings, select this field then press .
A dialog box will appear. Confirm by selecting Yes.